|
Print Technology:
|
Inkjet, HP 51645A High Capacity Inkjet Cartridge
|
|
Address Speed:
|
14,000/hr at 300 dpi
13,000/hr at 450 dpi
11,000/hr at 600 dpi
Note: Three Lines, 20 characters per line.
|
|
Print Quality (DPI):
|
600 dpi
550 dpi
450 dpi
400 dpi
300 dpi Fast
|
|
Cartridge Capacity:
|
46,000 addresses @ 300 dpi
23,000 addresses @ 450 dpi
11,500 addresses @ 600 dpi
Note: Based on 100 character addresses.
|
|
Cartridge Cleaning:
|
Automatic before, during and after print.
|
|
Print Area:
|
9" width
|
|
Print Orientation:
|
Normal and Reverse
|
|
Line Spacing:
|
1 to 10 lines per inch
|
|
Character Spacing:
|
0 to 90 characters
|
|
Character Size:
|
1X to 6X - height and width
|
|
Character Sets:
|
USA7, UK7, Fra7, GER7, Ita7, Den7, NOR7, SWE7, SwN7, Por7, PC8, Rom8, P850, ECMA, P8DN, ICEL, P852.
|
|
Ink monitor:
|
Via display.
|
|
Fonts:
|
12 Internal fonts plus downloadable fonts (see options).
|
|
Graphics:
|
Downloadable.
|
|
Test Print:
|
Customized and downloadable via PC.
|
|
Barcodes:
|
USPS 11-digit Delivery Point, USPS 2-D (pending), British Postal (bpo4), Dutch Postal (kix), 2/5 Interleave, Codabar, Code 39, EAN8 & 13 (UPC)
|
|
Material Size:
|
Length 75mm to 500mm (3" to 19.6")
Width 70mm to 305mm (2.75" to 17.1")
Thickness 6mm (.25")
|
|
Material Thickness:
|
Up to 1/4".
|
|
Feeder Capacity:
|
Up to 700 #10 envelopes.
|
|
Eject Delay:
|
0.1 to 9.9 seconds.
|
|
Microprocessor:
|
RISC 32-bit, 33 MHz
|
|
Memory:
|
Receive Buffer - 96K,
Fonts & Graphics - 448K.
|
|
Address Buffer:
|
Last 20 addresses.
|
|
Settings:
|
10 programmable settings.
|
|
Set-up Program
|
Via printer control panel or RENASet Program.
|
|
Firmware Update:
|
Via PC interface in flash proms.
|
|
PC interface:
|
Parallel.
|
|
Counters:
|
One resettable job counter, one permanent lifetime counter.
|
|
Noise:
|
<55 db
|
|
Duty Cycle:
|
60 million addresses total or 1 million per month over a 5-year life cycle.
|
|
Dimensions:
|
17.3" L x 16.1" W x 14.4" H
(24.75" With Extended Hopper Installed)
|
|
Weight:
|
54 lbs.
|
|
Electrical Requirements:
|
110 volts, 60 Hz
|
|
Options:
|
Conveyor Dryer/Stacker, RENAFont Soft Font Package, and a Serial Port Display Panel.
|
|
All Specifications Subject To Change Without Notice
|
